Sode registration

Home › Forums › Support › Sode registration

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • 20. September 2019 at 12:37 #3500
    BigMalc1
    Participant

    I have an issue with SODE not staying registered. If I check in the programme folder it needs activating before every flight and so I commence the flight with gates as normal but upon reaching my destination,(at an airport with SODE jetways), there are red crosses at every gate indicating SODE has deactivated. If you require further information please contact me via e-mail.

    Best regards,

    Malcolm Clenton

    20. September 2019 at 13:28 #3504
    12bPilot
    Keymaster

    Hi Malcolm,

    Which sim is this, FSX?

    The red crosses indicate missing objects, most probably due to faulty installation of the add-on airport scenery.

    20. September 2019 at 20:34 #3506
    BigMalc1
    Participant

    HI, thanks for the reply, I’m running P3D v4.5.

    If I don’t register SODE at the start of my flight the gatesare perfectly normal so it’s not an installation issue.

    As an example if I activate Sode and then start the sim and plan a flight from say Heathrow to Munich the gates at Heathrow are fine but arriving in Munich we have a “Red Cross” convention taking place! If I close the sim, reactivate Sode and do the same flight in reverse the gates at Heathrow are filled with  the red crosses.

    Many thanks,

    Malcolm.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.