PAPI turn on very close to rwy

Home Forums Support PAPI turn on very close to rwy

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • #4084
    David Rosenfeld
    Participant

    Hello Jeffrey

    I use the papi  with SODE and it’s work very nice but I have a problem it’s turn on to close to runway.

    I add the   “MetVisibility” and value to MAX. if you have some tip for me

    <SimObject Name=”LLBG_PAPI_26R_A”>

    <Placement Lat=”32.0173744353727″ Lon=”34.8880171693985″ Alt=”0.0#AGL” Hdg=”260.0″/>

    <Model SimTitle=”LLBG_PAPI”>

    <ConditionalVisibility  LogicExpression=”A|B”>

    <Condition ID=”A” Variable=”MetVisibility” Value=”MAX”/>

    <Condition ID=”B” Variable=”SeparationPlane” UseEyePoint=”Yes” Elevation=”3.5″ Azimuth=”0″ Offset=”0;0;0″ FlipNormal=”No”/>

    </ConditionalVisibility>

    </Model>

    </SimObject>

    thanks

    David

     

    #4091
    12bPilot
    Keymaster

    Hello David,

    I think you don’t need the MetVisibility condition, but if you do, the value must be a range XXX-XXX, a single value is not allowed and you should see errors in the log about this.

    So if you need the visibilty condition, use for example “0-MAX”. But it won’t help with this problem anyway…

    Question, are you using FSX for your testing?

    I think the ModelRadius of your light model with the SimTitle “LLBG_PAPI” needs to be increased. This can be done with ModelConverterX -> MDLTweaker.

    #4192
    David Rosenfeld
    Participant

    Hello again

    I can’t see my replay for you hope you can  I did try with MCX and I think ‘It’s did the trick I will give to my beta testers. hope they will improve it for me

    Thanks

    Dvsid

    #4198
    12bPilot
    Keymaster

    No, can’t see your initial reply…

    Let me know if this has solved your problem.

    -Jeffrey

    #4199
    David Rosenfeld
    Participant

    As it seems only on my scenery it’s looks OK but I have to be sure after all other tester say about it. so I hope to send the update today afternoon

    Thanks

    David

    #4219
    David Rosenfeld
    Participant

    Hi Jeffrey

    Sorry it’s a no go because the radius limit  no more then 10 km it’s around 6 nm and it’s not good enough. it have to be around 8 nm could be an issue with SeparationPlane

    anyway thanks you very very much for your tip

    Best regards

    David

Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.